鑫志科技 鑫志科技

Open Navigation
Search Inquiry List0
Close Search Form
HomeProductsTelecom XGPON and CloudXG(S)-PON/GPon AccessoryXG(S)PON OLT SFP+ N1 Module

XG(S)PON OLT SFP+ N1 Module

ADD INQUIRY
Overview
Overview
The XG(S)PON OLT SFP+ N1 Transceiver module is designed for dual play use, supporting XGS-PON and XG-PON transmissions up to a 20km distance. The Optical transceiver module is designed for low-cost point-to-multipoint (P2MP) Fiber to the Home (FTTH), Business or Curb (FTTx) applications. It employs a 1577nm CW mode downlink EML operating at 9.953Gb/s and a 1270nm APD/TIA burst mode uplink receiver operating at 9.953Gbps and 2.488Gb/s. It is housed in a rugged die cast SFP+ package and is designed to operate between 0 ~ 70C. The transceiver requires a 3.3V power supply for operation. The laser transmitter can be controlled by the LVTTL Tx_Disable function, and the optical receiver incorporates LVTTL Rx_SD output. This Transceiver is recommended for in use with the AirLive XGSPON OLT-2XGS OLT
Highlight Feature
Highlight Feature
  • 9.953Gb/s Tx CW Mode Data Rate
  • 1577nm CW Mode EML
  • 9.953Gb/s Rx Burst Mode Data Rate
  • 2.488Gb/s Rx Burst Mode Data Rate
  • 1270nm Burst Mode APD/TIA Receiver
  • 3.3V Power Supply
  • SFP+ with SC/UPC connector
  • Hot-pluggable capability
  • Support 20km transmission distance with SMF
  • Low Power Consumption
  • 0 to 70°C case operating temperature
  • Excellent ESD protection
  • DDM Supported
Absolute Maximum Ratings
Absolute Maximum Ratings
Absolute Maximum Ratings: Control Function Logic Levels
Absolute Maximum Ratings: Control Function Logic Levels
Recommended Operating Conditions
Recommended Operating Conditions
Transmitter Optical Characteristics
Transmitter Optical Characteristics
Receiver Optical Characteristics
Receiver Optical Characteristics
Transmitter Electrical Characteristics
Transmitter Electrical Characteristics
Receiver Electrical Characteristics
Receiver Electrical Characteristics
Digital RSSI Sample/Hold Timing
Digital RSSI Sample/Hold Timing
I2C Serial Logic
I2C Serial Logic
Model

AirLive XG(S)PON OLT SFP+ N1

Hardware
Power Supply Voltage3.135V~3.365V
Typical Power Supply Voltage: 3.3V
StandardComplies with SFF-8472
Complies with ITU-T G.9807.1 and ITU-T G.987.2
Complies with ITU-T G.984.2
Complies with IEC 61000-4-2, IEC 610004-3

Transmitter (Electrical - Optical)

Optical Center Wavelength XGS-PON:
Min.: 1575nm
Typical: 1577nm
Max.: 1580nm
Data Rate:
 - 9.953Gbps
Receiver -Optical, ElectricalOperating Wavelength XG/XGS-PON:
Min.: 1260nm
Typical: 1270nm
Max.: 1280nm
Data Rate:
 - 2.488Gbps
 - 9.953Gbps
RSSI Timing SpecificationOptical Input Signal Width: Min 300s
RSSI Trigger Delay: Min 0ns, Typ. 300ns
RSSI Trigger Width: Min 500ns
I2C Read Time: 500us
Environment
Case Operating Temperature0°C to +70°C
Storage Temperature-40°C to +85°C
Operating Relative Humidity5%~85%, non-condensing
Storage Relative Humidity5%~90%, non-condensing

 

Ordering Information

ModelAirLive XG(S)PON OLT SFP+ N1
XG(S)PON OLT Optical Module 10G/2.5G 20KM TX1577nm/RX1270nm
Standard Package
Product Size64.90(L) x 13.72(W) x 8.55(H) mm
Package SizeTBD cm (LxWxH)
Package WeightTBD  kg
Package Content1 x Fiber Module
Spec Sheet
NameDescriptionDownloadDate
XG(S)PON OLT SFP+ N1 Spec Sheet
2024/12/11
BACK TO LIST
TOP