鑫志科技

The AirLive IGM-1082RPOE is a L2 managed 8-port Gigabit PoE+ switch with 8 PoE+ 10/100/1000BASE-T 802.3at/af ports, each port supplying up to 30Watts of power automatically adaptive, and 2 fiber optic ports 100/1000/1250Mbps. Made for extreme environments with its wide temperature range from -40°C to 75°C and rugged IP40 metal housing; Dual power inputs using a 4pin terminal block (DC48~55V). 

The 10-port Industrial Gigabit management switch offers comprehensive SNMP management functions including  IGMP, VLAN , Port aggregation, QoS port mirroring, bandwidth control.  Ring Network Protocol ERPS is supported. ERPS supports multi-ring and multi-domain structures. It supports main device backups, load sharing and other work methods in 50ms switching, making for one of the lowest fault recovery time and makes  sure that your critical industrial network keeps working.
 

The Switch IGM-1082RPOE supports high power and each port at auto adaptively. With PoE management function to control PoE port setting, Timer setting and Timer reboot setting, and PoE watchdog. All the PoE management functions ensure full power for the connected PD and great reliability for the whole system. 

After PoE Watchdog function enabled, the IGM-1082RPOE switch works as a virtual security guard. When the POE port is continuously powered but there is no traffic, the POE watchdog will be triggered. After 2 minutes of detection, the power supply will be stopped and then powered on. PoE Watchdog is especially helpful for camera. For example, when turning on the function, the switch will detect the front-end camera for 24/7. If there is no traffic output from the camera, it is judged that the camera is frozen, and the front-end camera will be restarted through PoE power failure to solve the problem.

The IGM-1082RPOE switch can operate from -40°C ~ 75°C. And each POE port has 6KV surge protection. It is the ideal solution for applications which work under harsh environment and require stable network and PoE power such as parking lot or IP surveillance. The IGM-1082RPOE has a rugged high strength metal case which is rated at IP40 and has a DIN35 Rail connection making it suitable for network use in a heavy industry or factories. AirLive Industrial switches can be placed in almost any harsh environment.

ERPS is supported by the IGM-1082RPOE Switch. ERPS supports multi-ring and multi-domain structures (master and sub rings) and optimizes the inspection mechanism in terms of two-way faults. In addition, it supports main device backups, load sharing and other work methods in <50ms switching.

This means that when multiple switches have been placed in a Ring and the network work is interrupted, it will recover within 50ms or less. Meaning the critical network like in harsh environments or automated production lines and surveillance will be online again with minimum loss of time. The ring network is also protected again loops.

Extend the network further with the 1.25G SFP slots. The SFP ports also supports DDM which offers more information about the fiber connection and makes it easier to find any faults or bad connections.

AirLive IGM-1082RPOE Industrial switch meets the high standard demands of providing reliable networking connectivity, able to withstand harsh industrial environment, and cost-effectively.

The IGM-1082RPOE is a management switch which is packed with features and uses the many VLAN functions to separated the traffic on your network. Or use the QoS functions to stream your network in a smooth and non congested network these and many more functions can be found in the AirLive industrial Switch.