The GPON OLT Transceiver module is designed for Gigabit Ethernet Passive Optical Network (GPON) transmissions over a 20km distance. It incorporates a 1490nm continuous-mode transmitter and a 1310nm burst-mode receiver. The transmitter uses a 1490nm DFB laser and an integrated laser driver that ensures class-1 eye safety, even in the presence of a single fault. The laser driver includes APC and temperature compensation functions to maintain consistent launch optical power and extinction ratio in varying temperature and aging conditions.
The receiver section features an integrated APD and BM-preamplifier. The module provides a receiver burst-power-detect signal and a digitalized burst mode optical power monitoring function. The digital conversion of received ONU optical power is achieved through a Trigger input, activated by a rising edge. The DDM processor initiates a burst optical power conversion, and the digital result is accessible via the DDM interface after a specified Burst Optical Power Conversion Time. The module also incorporates an integrated WDM coupler to differentiate between 1310nm input light and 1490nm output light. Housed in a metallic package, the module guarantees excellent EMI and EMC characteristics, ensuring reliable performance in various environments.
Model | AirLive GPON OLT SFP C+++\GPON OLT SFP C++++ |
Hardware | |
Power Supply Voltage | 3.13V~3.47V Typical Power Supply Voltage: 3.3V |
Absolute Maximum Ratings | Supply Voltage: Min -0.5V, Max 3.6V RxTotal Optical Power: -8dm (Damage Threshold) |
Standard | MIL-STD-883H Method 3015.8 IEC61000-4-2: 8kV Contact Discharge 15kV Air Discharge Compatible with EN 55024:1998+A1+A2 IEC- 61000-4-2, GR-1089-CORE FCC Part 15 Class B, EN55022:2006 CISPR 22B :2006, VCCI Class B EN 55024:1998+A1+A2, IEC 61000-4-3 CDRH compliant and Class I laser product.: FDA 21CFR 1040.10 and 1040.11 EN (IEC) 60825-1:2007, EN (IEC) 60825-2:2004+A1 |
Model | C+++ PO +6~+10dBm C++++ PO +9~+13dBm |
Transmitter (Electrical - Optical) | Data Rate: 2488Mbps Optical Center Wavelength: Min 1480nm, Typical 1490nm, Max 1500nm Distance: 20KM Optical Spectrum Width (-20dB): 1nm Side Mode Suppression Ratio: 30dB Power-OFF Transmitter Optical Power: -39dB Extinction Ratio: 8.2db Tolerance to Transmitter Incident Light: -15dB Transmitter and Dispersion Penalty: 1dB Optical Waveform Diagram: ITU-T G.984.2 Differential Data Input Swing (Vin): Min 200, Max 2400mVpp Input Differential Impedance (Zin): Min 90, Typical 100, MAx 110Ohm Tx_Disable - Disable (VD) Min 2.0V, Max VCC - Enable (VEN) Min GND, Max GND+0.8V TX_Fault - Fault (VF) Min 2.0V, Max VCC - Normal (VNO) Min GND, Max GND+0.4V |
Receiver -Optical, Electrical | Data Rate: 1244Mbps Optical Center Wavelength: Min 1260nm, Typical 1310nm, Max 1360nm Saturation Optical Power: PSAT(C+++) -15dBm,PSAT(C++++) -15dBm Signal Detect Assert Level: -34dBm Signal Detect De-Assert Level: -45dBm Signal Detect Hysteresis: Min0.5dBm, Max6dBm Receiver Reflectance: -12db Receiver Burst Mode Dynamic Range: 15db Differential Data Output Swing (Vout): Min 600, Max 1500mVpp Output Differential Impedance (Zout): Min 90, Typical 100, MAx 110Ohm Signal Detect de-assert Time (TSDD): 12.8ns Signal Detect assert Time (TSDA): 50ns Signal Detect Voltage - High (VOH) Min 2.4V, Max VCC - Low (VOL) Min GND, Max GND+0.4V |
Environment | |
Operating Temperature | 0°C to +70°C |
Storage Temperature | -40°C to +85°C |
Working Humidity | 5%~95%, non-condensing |
Model | AirLive GPON OLT SFP C+++\GPON OLT SFP C++++ GPON OLT Optical Module 2.5G/1.25G 20KM TX1490nm/RX1310nm |
Standard Package | |
Product Size | 63.60(L) x 13.4(W) x 8.5(H) mm |
Package Size | TBD mm (LxWxH) |
Package Weight | TBD kg |
Package Content | 1 x Fiber Module |
Name | Description | Download | Date |
GPON OLT SFP C+++/C++++ Spec Sheet | GPON OLT SFP C+++/C++++ | 2023/07/06 |