.png){kind=logo}
In this Setup example a AirLive XGSPON OLT-2XGS and AirLive ONU-10XG(S)-AX304P-2.5G was used.
Please click the PDF file.
Download
The AirLive XGSPON OLT-2XGS is a recently launched XG(S)-PON OLT that caters to new optical fiber communication networks. It conforms to international standards like ITU-T G.9807 (XGS-PON) and ITU-T G.987 (XG-PON) and supports two bandwidth access modes: 1. Asymmetric mode with 2.5Gbps upstream and 10Gbps downstream speed, and 2. Symmetrical mode with 10Gbps upstream and downstream speeds. It also support ITU-T G.984 (GPON). It is an ideal fit for high-bandwidth scenarios such as carrier networks, FTTx, and enterprise networks. The compact 1U chassis of the XGSPON OLT-2XGS makes it easy to deploy. Its Broadcom + NXP chipset solution ensures a robust performance.
The XGSPON OLT-2XGS boasts many ports, providing 2*GE (RJ45) + 2*10GE (SFP+) uplink ports for full line-speed data forwarding. It also offers 2 XG(S)-PON downlink interfaces with a splitting ratio of 1:128 to access the user's ONT. This device is designed for use in FTTH (Fiber-to-the-Home) and small business applications the require the new higher data transfer speeds. To use XG/XGS PON a XG/XGS PON SFP+ module is needed. To use GPON a GPON PON SFP module is needed. The OLT can only work with a single PON mode selected either XG or XGS or GPON.
| Hardware | |
| Model | AirLive XGSPON OLT-2XGS |
| Device Interface | •PON Port: 2x XG(S)-PON (SFP+) •Uplink: 2x 1G RJ45 •Uplink : 2x 10G SFP+ •Console: 1*10/100/1000BASE-T out-band port, 1*Console port, 1x Console USB-COM Type C port, 1*USB2.0 •Fiber Type: 9/125μm SMF •Connector: SC/UPC •Supported ONUs: 256 •GPON port speed: GPON ONU: Upstream 1.244Gbps, Downstream: 2.488Gbps XG-PON ONU: Upstream 2.488Gbps, Downstream: 9.953Gbps •Wavelength: XG(S)-PON TX 1577nm, RX 1270nm, GPON TX 1490nm, RX 1310nmXGS-PON ONU: Upstream 9.953Gbps, Downstream: 9.953Gbps •Max splitting ratio: 1:128 (Module Based)** •Transmission Distance: 20KM •Backplane Bandwidth: 280Gbps •Port Forwarding Rate: 124.992Mpps •Management Mode: WEB, Telnet, CLI |
| Firmware features | |
| Management Function | Telnet, CLI, WEB, Fan Group Control Port Status monitoring and configuration management Online ONU configuration and management User management Alarm management |
| Layer2 Switch | 16K Mac address Support 4096 VLANs Support port VLAN Support VLAN tag/Un-tag, VLAN transparent transmission Support VLAN translation and QinQ Support storm control based on port Support port isolation Support port rate limitation Support 802.1D and 802.1W Support static LACP, Dynamic LACP QoS based on port, VID, TOS and MAC address Access control list IEEE802.x flow control Port stability statistic and monitoring |
| Multicast | IGMP Snooping 1K L2 Multicast Groups 1K L3 Multicast Groups |
| DHCP | DHCP server, DHCP relay, DHCP snooping DHCP option82 |
| Layer 3 Route | ARP proxy 16K hardware Host Routes, 1024 hardware Subnet Routes Support static route |
| IPv6 | Support NDP Support IPv6 Ping, IPv6 Telnet, IPv6 routing Support ACL based on source IPv6 address, destination IPv6 address, L4 port, protocol type, etc Support MLD v1/v2 snooping (Multicast Listener Discovery snooping) |
| PON Function | T-CONT DBA x-GEM traffic In compliant with ITU-T G.9807 (XGS-PON), ITU-T G.987(XG-PON) and ITU-T G.984 (GPON) Support Up to 20KM transmission distance Support data encryption, multi-cast, port VLAN, separation, RSTP, etc Support ONU auto-discovery/link detection/remote upgrade of software Support VLAN division and user separation to avoid broadcast storm Support power-off alarm function, easy for link problem detection Support broadcasting storm resistance function Support port isolation between different ports Support ACL and SNMP to configure data packet filter flexibly Specialized design for system breakdown prevention to maintain stable system |
| Power Consumption | |
| Power | 1x AC 100~240V, 50/60Hz (Default) 2x AC 100~240V, 50/60Hz (Option) 1x AC 100~240V, 1x DC 48V (Option) 2x DC 48V (Option) |
| Power Consumption | Max 40W |
| Environment | |
| Working Temperature | -20°C to +60°C |
| Storage Temperature | -40°C to +70°C |
| Relative Humidity | 5%~95%, non-condensing |
| **Note** | |
| PON Mode | The OLT-2XGS supports GPON or XG-PON or XGS-PON. Select the PON mode in the Webui of the OLT. Only 1 mode can be used at any given time. For XG or XGS-PON the AirLive XG/XGSPON OLT SFP+ N2 module must be used. For GPON a GPON module must be used. |
| Splitting Ratio | The Max Splitting ratio is 1:256 for the XG/XGS OLT PON Port. But the XG/XGS PON module is currently limited to 1:128. This means only 128 XG/XGS ONU’s can be connected per PON port. |
| Model | XGSPON OLT-8XGS AirLive XGSPON OLT-2XG 2 Port 10G XG(S)PON OLT with 10G SFP+ |
| Standard Package | |
| Product Size | 44.2(L) x 20.2(W) x 4.36(H) cm |
| Package Size | 57.5(L) x 38.0(W) x 11.5(H) cm |
| Package Weight | N.W: 2.485kg (Single Power) G.W: 3.895kg |
| Package Content | 1 x Device, 1 x Power Cable , Installation Kits, QIG |
| Carton Package | |
| Quantity | PCS / 1 Carton |
| Dimensions | 57.5(L) x 38.0(W) x 11.5(H) cm |
| Weight | 3.895kg |
| Name | Description | Download | Date |
| XGSPON OLT-2XGS QIG | 2024/07/18 |
| Name | Description | Download | Date |
| XGSPON OLT-2XGS User Guide | 2024/07/18 |
| Name | Description | Download | Date |
| XGSPON OLT-2XGS Spec Sheet | 2024/07/08 |
