| Hardware | |
| Model | AirLive L3POE-2TX2406 |
| Device Interface | 24 x 10/100/1000/2500M PoE 30W Ports (Port 1~4 PoE 90W) 6 x 10G SFP+ Ports 1 x RJ45 Console Port |
| Standards | IEEE 802.3: Ethernet MAC Protocol IEEE 802.3u: 100BASE-TX Fast Ethernet IEEE 802.3ab: 1000BASE-T Gigabit Ethernet IEEE 802.3bz:2.5GBASE-T Multi Giga Ethernet IEEE 802.3z: 1000BASE-X Gigabit Ethernet (optical fiber) IEEE 802.3ae: 10G Ethernet (optical fiber) IEEE 802.3az: Energy Efficient Ethernet IEEE 802.3ad: Standard method for performing link aggregation IEEE 802.3x: Flow control IEEE 802.1ab: LLDP/LLDP-MED (Link Layer Discovery Protocol) IEEE 802.1p: LAN Layer QoS/CoS Protocol Traffic Prioritization(Multicast filtering function) IEEE 802.1q: VLAN Bridge Operation IEEE 802.1x: Client/Server Access Control and Authentication Protocol IEEE 802.1d: STP IEEE 802.1s: MSTP IEEE 802.1w: RSTP IEEE 802.3af (15.4W) IEEE 802.3at (30W) IEEE 802.3bt (90W) |
| LED Indicators | PWR(Power indicator),SYS(System lights), Warning Light Temp/Voltage), Link RJ-45 port: Green 2.5G, Yellow 100/1000Mbps, PoE LED (On/Off), Link SFP+ port: Blue 10G, Green 2.5G PoE Max LED: Off: indicates PoE power usage is less than 90% Flashing: indicates PoE power usage of 90% ≤ P ≤ 95% On: indicates that PoE power is used at 95%<P<100% |
| Lighting Surge Protection | Support Port Surge Protection: General 4KV, Differential 2KV (level B), ESD 12KV Air, 6KV contact (level B) |
| Mechanical | Solid metal 19” 1U rack-mountable |
| Power and POE | |
| Protocol | IEEE802.3bt (90W, IEEE802.3at (30W), IEEE802.3af (15.4W) |
| PoE Port | 24 |
| PoE Power Output / PoE Port 1~4 | max. 90 watts |
| PoE Power Output / PoE Port 5~24 | max. 30 watts |
| PoE Power Output / PoE switch | max. 400 watts |
| PoE Software Function | Support PoE Time Management Schedule, Support PoE Port Timer Reboot PoE Configuration: PoE Temperature, PoE Type/Level/Power/ Voltage/Current, PoE Switch, PoE Watchdog, PoE power AF/AT adaptation |
| Power Input | AC100~240VAC |
| Power Consumption PoE | PoE Total Power Maximum 400W |
| Power Consumption Switch | Maximum 52W |
| Switch Architecture | Performance | |
| Switching architecture | Bandwidth: 240Gbps Packet Forwarding Rate: 178.56Mpps DDR SDRAM: 512MB Flash Memory: 32MB Package cache: 16Mbit MAC Address: 32K Jumbo frame: 10Kbytes VLANs: 4096 MTBF: 100000 hour |
| Fiber Medium | Multi-mode Fiber: 50/125 , 62.5/125, 100/140um Single-mode Fiber: 8/125, 8.7/125, 9/125, 10/125um |
| Software Function L3 | |
| IPv4 | Support IPv4 VLAN Interface, IPv4 Static Routes, ARP |
| IPv6 | Support IPv6 VLAN Interface, IPv6 Static Routes, IPv6 ND |
| RIP | Support V1/V2 |
| OSPF | Support Router-ID, Authentication, V2 |
| Software Function L2 | |
| Port Function | Support Port Switch Configuration, Port Description Configuration, Port Speed Configuration, Port Duplex Configuration, Port Flow Control Configuration, Jumbo Frame up to 10K, Fiber Module (DDM) |
| Link Aggregation | Support load balance policy; based on MAC and IP-MAC, Static and Dynamic Group, Support LACP Up to 8 groups |
| Storm Control | Support Broadcast Suppression, Unknown Multicast, Unknown Unicast |
| Port Mirroring | Support One to one monitor, Many to one monitor, Ingress/Egress/Both, Up to 4 session groups |
| Port Security | Support MAC Address Constraints, Port Security MAC Address, Protect/Restrict/Shutdown |
| Port Isolation | Supported |
| Port Rate-limit | Supported |
| Loopback Detection | Supported |
| VLAN | Support Access/Trunk/Hybrid Support VLAN Tunnel (Q-in-Q Tunnel) Support Configurable VID from 1 - 4094; Max. 4K static VLAN groups Support Voice VLAN, MAC VLAN, Surveillance VLAN, Protocol VLAN Support GVRP |
| MAC Address | Support Dynamic Address, Static MAC address, Filtering MAC Address |
| Spanning tree | Support STP(IEEE 802.1d), RSTP(IEEE 802.1w) and MSTP(IEEE 802.1s) protocol Support BPDU Filter, BPDU Guard, Edge Port |
| ERPS (Ethernet Ring Protection) | Support G.8032 (ERPS), ERPS Instance |
| LLDP | Support LLDP, LLDP MED |
| Multicast | Support IGMP Snooping, IGMP v1/v2/v3, Router Port, Static IGMP group address, IGMP groups filtering, Querier, MLD Snooping, MVR |
| QoS | Support Traffic classification based, Strict priority and WRR, Port Priority, 802.1P Priority, IP TOS Priority, IP DSCP Priority, Supports up to 8 queues per port, Priority Remarking |
| Ring protection | Support Ring protection |
| Link Aggregation | Support Static Aggregation Support LACP Dynamic Aggregation Support based on IP, MAC, mixed load-balancing modes Maximum support 8 aggregation groups (8 ports per aggregation group) |
| IPv6 | Support IPv6 Ping、IPv6 Traceroute、IPv6 Telnet Support IPv6 SSH Support IPv6 HTTP 、IPv6 HTTPS |
| Management and Maintenance | |
| Management and Maintenance | Support WEB Management (HTTP、HTTPS) Support CLI (Telnet, SSH V1/V2, Local serial port) Support SNMP V1/V2/V3/MIB Support RMON V2 Support LLDP Device discovery Support SNTP Time synchronization Support CPU Monitoring, Memory Monitoring Support System log, classification warning Support Ping, Traceroute detection, cable detection |
| Environment | |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -40°C to +70°C |
| Working Humidity | 10%~90%, non-condensing |
| Storage Humidity | 5%~95%, non-condensing |
| Model | L3POE-2TX2406-450 BT L3 Managed Multi Giga PoE++ 802.3at/bt Switch, 450W 30-Port including 6x 10G SFP+ Fiber ports. |
| Standard Package | |
| Product Size | 44.0(L) x 36.0(W) x 4.45(H) cm |
| Package Size | 58.0(L) x 44.0(W) x 12.0(H) cm |
| Package Weight | N.W: 5.49kg G.W: 6.85kg |
| Package Content | Switch x 1, QIG x 1, Power cord x 1, Serial cable x 1, Rack ear x 1 |
| Carton Package | |
| Quantity | 2PCS / 1 Carton |
| Dimensions | 60.0(L) x 46.0(W) x 27.8(H) cm |
| Weight | 14.7kg |
| Name | Description | Download | Date |
| L3POE-2TX2406-450 BT QIG | 2024/07/29 |
| Name | Description | Download | Date |
| L3POE-2TX2406 Spec Sheet | 2023/11/28 |
| Name | Description | Download | Date |
| AirLive L2+ and L3 Switch Series CE+RoHS | AirLive L2+ and L3 Switch Series CE+RoHS | 2022/06/07 |
.png){kind=logo}