|
|
|
|
 |
 |
|
|
|
 |
|
|
|
| Q: |
When I change from "Dual AP, WDS+AP, or Client+AP" modes to "WISP+AP" and "Gateway+AP" modes; my computer gets DHCP address from G.DUO. But I can't connect with Internet. Why?
|
| A: |
When you change from non-router mode to router mode, the DHCP server will be turned on. However, the DHCP server range will not change. Therefore, you should change the DHCP IP range manually from "System Configuration -> LAN Interface Setup" menu |
|
|
|
| Q: |
Why is there "Default Gateway" settings in LAN interface setup for WISP+AP mode and Gateway+AP mode?
|
| A: |
When you are in "WISP+AP "mode or "Gatway+AP" mode, the default gateway should be configured on the "WAN Port" settings. Therefore, you should leave the LAN Interface's Default Gateway settings blank or the same as Device IP. There is no need to change it. This field is reserved for debugging purpose only. |
|
|
|
| Q: |
When I connect my notebooks with G.DUO. When transferring large file, I get unstable performance?
|
| A: |
Please download the latest firmware from the G.DUO Download page here. |
|
|
|
| Q: |
Why am I getting unstable performance on the G.DUO? What can I do to increase the performance?
|
| A: |
Click Here. |
|
|
|
| Q: |
What are the available Telnet and SSH commands?
|
| A: |
Click Here. |
|
|
|
| Q: |
I tried to use Emergency firmware upgrade, but it doesn't work?
|
| A: |
Please check the followings
- Please make sure your PC is connected to the LAN2, LAN3, or LAN4 port. Do not connect to LAN1 for emergency firmware repair
- Please make sure you are using only the special firmware for emergency upgrade. It can be found from our website's download page
- The emergency upgrade web server only work with specific browser. Please try to use Mosaic Firefox 3.0.11
|
|
|
|
|
|
|
|
| |
|
|
|
